Wave turbulence and intermittency in directional wave fields

The evolution of surface gravity waves is driven by nonlinear interactions that trigger an energy cascade similarly to the one observed in hydrodynamic turbulence. This process, known as wave turbulence, has been found to display anomalous scaling with deviation from classical turbulent predictions due to the emergence of coherent and intermittent structures on the water surface. In the ocean, waves are spread over a wide range of directions, with a consequent attenuation of the nonlinear properties. A laboratory experiment in a large wave facility is presented to discuss the sensitivity of wave turbulence on the directional properties of model wave spectra. Results show that the occurrence of coherent and intermittent structures become less likely with the broadening of the wave directional spreading. There is no evidence, however, that intermittency completely vanishes.     

EAST装置上W波段多道极向相关反射仪的研制

在EAST装置上安装了X模极化W波段多道相关反射仪，用于测量等离子体芯部密度涨落。该诊断利用低损耗(<3dB)多工器将4个不同频率(79.2GHz，85.2GHz，91.8GHz和96GHz)的微波耦合在一起，通过同一个天线发射。反射波由两个极向分离(~5cm)的天线接收，通过下变频技术实现外差测量。通过对两个极向天线接收的信号进行相关分析，获得芯部湍流垂直速度。对2018年低约束模式(L模)放电进行分析发现，在电子回旋共振加热(ECRH)等离子体中，芯部湍流垂直速度在电子逆磁漂移方向。而在注入同向中性束(co-NBI)后，芯部湍流垂直速度变为离子逆磁漂移方向。     

基于Terminal滑模的有限时间混沌同步实现

提出了混沌同步有限时间实现问题，将Terminal滑模控制技术与混沌同步问题相结合，把同步问题视为响应系统的跟踪问题，给出了由线性滑模函数引入非线性项构造Terminal滑模面的充分条件，以及相应Terminal滑模控制器.以主从Duffing系统为例研究验证同步策略的可行性和有效性. 关键词： Terminal滑模 混沌同步 Duffing系统     

Stationary turbulent closure via the Hopf functional equation

Exact closed-form solutions are exhibited for the Hopf equation for stationary incompressible 3D Navier-Stokes flow, for the cases of homogeneous forced flow (including a solution with depleted nonlinearity) and inhomogeneous flow with arbitrary boundary conditions. This provides an exact method for computing two- and higher-point moments, given the mean flow.     

用自适应脉冲微扰引导混沌系统到周期解

用自适应脉冲微扰方法控制的系统的某个系统变量作为驱动,设计了一种自适应控制器方法对两个或多个响应混沌系统进行脉冲微扰,引导这些系统从混沌运动到低周期运动,实现同时控制多个混沌系统到不同的周期态. 当选择相同的自适应控制器输入变量实施脉冲微扰时,还可控制两个或多个混沌系统达到不同的周期态同步. 通过对R?ssler混沌系统的仿真研究证实了方法的有效性. 关键词： 混沌控制 系统参量 自适应控制器 脉冲微扰 周期态同步     

水平均匀大气中多束光在接收面上的相关性及其对光强起伏的影响

在科尔莫戈罗夫理论的基础上，推广了光束在接收面上相关函数的物理含义。分析了多光束在接收面上的相关性。并在此基础上形成多光束光强起伏方差的解析表达式。分析结果表明，随着信道间距的增加，信道相关性下降。到达接收面的光强起伏方差降低；当信道完全重合，即相关系数变为1时，叠加后的光强起伏方差没有明显降低。与单光束时没有区别；在允许范围内增加光束数目可降低光强起伏。     

Assessment of two‐equation turbulence modelling for high Reynolds number hydrofoil flows

This paper presents an evaluation of the capability of turbulence models available in the commercial CFD code FLUENT 6.0 for their application to hydrofoil turbulent boundary layer separation flow at high Reynolds numbers. Four widely applied two‐equation RANS turbulence models were assessed through comparison with experimental data at Reynolds numbers of 8.284×106 and 1.657×107. They were the standard k–εmodel, the realizable k–εmodel, the standard k–ωmodel and the shear‐stress‐transport (SST) k–ωmodel. It has found that the realizable k–εturbulence model used with enhanced wall functions and near‐wall modelling techniques, consistently provides superior performance in predicting the flow characteristics around the hydrofoil. Copyright © 2004 John Wiley & Sons, Ltd.     

Karhunen–Loeve representations of turbulent channel flows using the method of snapshots

For three‐dimensional flows with one inhomogeneous spatial coordinate and two periodic directions, the Karhunen–Loeve procedure is typically formulated as a spatial eigenvalue problem. This is normally referred to as the direct method (DM). Here we derive an equivalent formulation in which the eigenvalue problem is formulated in the temporal coordinate. It is shown that this so‐called method of snapshots (MOS) has some numerical advantages when compared to the DM. In particular, the MOS can be formulated purely as a matrix composed of scalars, thus avoiding the need to construct a matrix of matrices as in the DM. In addition, the MOS avoids the need for so‐called weight functions, which emerge in the DM as a result of the non‐uniform grid typically employed in the inhomogeneous direction. The avoidance of such weight functions, which may exhibit singular behaviour, guarantees satisfaction of the boundary conditions. The MOS is applied to data sets recently obtained from the direct simulation of turbulence in a channel in which viscoelasticity is imparted to the fluid using a Giesekus model. The analysis reveals a steep drop in the dimensionality of the turbulence as viscoelasticity is increased. This is consistent with the results that have been obtained with other viscoelastic models, thus revealing an essential generic feature of polymer‐induced drag reduced turbulent flows. Published in 2006 by John Wiley & Sons, Ltd.     

Champ de vitesse dans un échangeur à vortex en régime turbulentHeat exchanger velocity field with turbulent inlet condition

We consider the isothermal flow through a cylindrical flat chamber, a model of some particular heat exchanger, for which LDV measurements and a numerical simulation have been performed. Experimental results show the establishment of an important vortex zone, the secondary flow extending all along the chamber radius. This observation leads to an expected significant increase of the fluid mixing. Results issued from the numerical simulation appear to be in close agreement with experimental data. Nevertheless, the k–ε model used here must be improved to obtain a better approach near the vortex centre. To cite this article: S. Petitot et al., C. R. Mecanique 330 (2002) 593–599.     

Separate Polarization Modes Synchronization and Synchronization Switches between Vertical-Cavity Surface-Emitting Lasers

For vertical-cavity surface-emitting lasers (VCSELs) with polarization-rotated feedback, there exist several synchronization types such as synchronizations between total powers and synchronizations between separate polarization modes. Based on the two-mode rate equations, we study and compare numerically the performances of different synchronization types. Our results show that three synchronization types exhibit good performances when their synchronization conditions are satisfied. They are the complete synchronization between total powers, complete synchronization between x-polarized modes, and generalized synchronization between x-polarized and y-polarized modes. The former two types are sensitive to the injection rate and spontaneous emission, while the third type is contrary. Synchronization type with the best performance may switch from one to another, with changing of injection rate and spontaneous emission factor.